Share
𝕏 Facebook LinkedIn

Microstructure and Properties of Electromagnetic Field-Assisted Laser-Clad Norem02 Iron-Based Cemented Carbide Coating.

PAPER pubmed Materials (Basel, Switzerland) 2023 Engineering / measurement Effect: benefit Evidence: Insufficient

Abstract

An electromagnetic field-assisted (EMF-assisted) laser cladding technique was used to prepare Norem02 iron-based cemented carbide coatings on 304 stainless steels. The coatings then were characterized in terms of their microstructure, microhardness, residual stress, and wear resistance. The results indicated that EMF did not change the phase composition of the Norem02 iron-based cemented carbide coating, but significantly affected its microstructure and properties. EMF accelerated the formation of more uniform and refined microstructure. With an increasing current intensity of EMF to 40 A, the dendritic and columnar crystal structure of the coating gradually transformed into uniform and fine equiaxed grains. However, when the EMF current intensity was increased to 80 A, a small number of small dendrites and columnar crystals began to appear at the top and bottom of the coating. Accordingly, the microhardness first increased, then decreased, and achieved a max of 376.9 HV at EMF current intensity of 40 A. EMF also improved the wear resistance of the coatings, reduced the cracking sensitivity, and reduced residual stress on the surface by 45.2%.

AI evidence extraction

At a glance
Study type
Engineering / measurement
Effect direction
benefit
Population
—
Sample size
—
Exposure
electromagnetic field-assisted laser cladding
Evidence strength
Insufficient
Confidence: 74% · Peer-reviewed: yes

Main findings

Electromagnetic field (EMF)-assisted laser cladding of Norem02 iron-based cemented carbide coatings on 304 stainless steel did not change phase composition but altered microstructure and properties. Increasing EMF current to 40 A refined microstructure toward uniform equiaxed grains and increased microhardness (maximum 376.9 HV), while at 80 A some dendrites/columnar crystals reappeared and microhardness decreased. EMF improved wear resistance, reduced cracking sensitivity, and reduced surface residual stress by 45.2%.

Outcomes measured

  • Phase composition
  • Microstructure (grain structure)
  • Microhardness
  • Residual stress
  • Wear resistance
  • Cracking sensitivity

Suggested hubs

  • engineering (0.9)
    Study evaluates electromagnetic field-assisted manufacturing (laser cladding) effects on coating microstructure and mechanical properties.
View raw extracted JSON
{
    "study_type": "engineering",
    "exposure": {
        "band": null,
        "source": "electromagnetic field-assisted laser cladding",
        "frequency_mhz": null,
        "sar_wkg": null,
        "duration": null
    },
    "population": null,
    "sample_size": null,
    "outcomes": [
        "Phase composition",
        "Microstructure (grain structure)",
        "Microhardness",
        "Residual stress",
        "Wear resistance",
        "Cracking sensitivity"
    ],
    "main_findings": "Electromagnetic field (EMF)-assisted laser cladding of Norem02 iron-based cemented carbide coatings on 304 stainless steel did not change phase composition but altered microstructure and properties. Increasing EMF current to 40 A refined microstructure toward uniform equiaxed grains and increased microhardness (maximum 376.9 HV), while at 80 A some dendrites/columnar crystals reappeared and microhardness decreased. EMF improved wear resistance, reduced cracking sensitivity, and reduced surface residual stress by 45.2%.",
    "effect_direction": "benefit",
    "limitations": [],
    "evidence_strength": "insufficient",
    "confidence": 0.7399999999999999911182158029987476766109466552734375,
    "peer_reviewed_likely": "yes",
    "keywords": [
        "electromagnetic field-assisted",
        "laser cladding",
        "Norem02",
        "iron-based cemented carbide coating",
        "304 stainless steel",
        "microstructure",
        "microhardness",
        "residual stress",
        "wear resistance"
    ],
    "suggested_hubs": [
        {
            "slug": "engineering",
            "weight": 0.90000000000000002220446049250313080847263336181640625,
            "reason": "Study evaluates electromagnetic field-assisted manufacturing (laser cladding) effects on coating microstructure and mechanical properties."
        }
    ]
}

AI can be wrong. Always verify against the paper.

AI-extracted fields are generated from the abstract/metadata and may be incomplete or incorrect. This content is for informational purposes only and is not medical advice.

Comments

Log in to comment.

No comments yet.