Share
𝕏 Facebook LinkedIn

Impact of one's own mobile phone in stand-by mode on personal radiofrequency electromagnetic field exposure.

PAPER pubmed Journal of exposure science & environmental epidemiology 2013 Randomized trial Effect: mixed Evidence: Moderate

Abstract

When moving around, mobile phones in stand-by mode periodically send data about their positions. The aim of this paper is to evaluate how personal radiofrequency electromagnetic field (RF-EMF) measurements are affected by such location updates. Exposure from a mobile phone handset (uplink) was measured during commuting by using a randomized cross-over study with three different scenarios: disabled mobile phone (reference), an activated dual-band phone and a quad-band phone. In the reference scenario, uplink exposure was highest during train rides (1.19 mW/m(2)) and lowest during car rides in rural areas (0.001 mW/m(2)). In public transports, the impact of one's own mobile phone on personal RF-EMF measurements was not observable because of high background uplink radiation from other people's mobile phone. In a car, uplink exposure with an activated phone was orders of magnitude higher compared with the reference scenario. This study demonstrates that personal RF-EMF exposure is affected by one's own mobile phone in stand-by mode because of its regular location update. Further dosimetric studies should quantify the contribution of location updates to the total RF-EMF exposure in order to clarify whether the duration of mobile phone use, the most common exposure surrogate in the epidemiological RF-EMF research, is actually an adequate exposure proxy.

AI evidence extraction

At a glance
Study type
Randomized trial
Effect direction
mixed
Population
—
Sample size
—
Exposure
RF mobile phone · during commuting (train/public transport and car; stand-by mode with periodic location updates)
Evidence strength
Moderate
Confidence: 74% · Peer-reviewed: yes

Main findings

In a randomized cross-over commuting measurement study, uplink exposure in the reference (disabled phone) scenario was highest during train rides (1.19 mW/m^2) and lowest during rural car rides (0.001 mW/m^2). In public transport, the impact of the participant’s own phone in stand-by mode was not observable due to high background uplink from other people’s phones, whereas in a car an activated phone produced uplink exposure orders of magnitude higher than the reference scenario. The authors conclude that personal RF-EMF exposure measurements are affected by one’s own phone in stand-by mode because of regular location updates.

Outcomes measured

  • Personal RF-EMF exposure measurements (uplink) during commuting
  • Uplink power density (mW/m^2) under different phone stand-by scenarios

Limitations

  • Sample size not reported in abstract
  • Frequencies/bands not quantified beyond dual-band vs quad-band
  • Exposure metric limited to uplink/power density during commuting; generalizability to other settings not stated
  • Background exposure from others may mask own-phone contribution in some environments
View raw extracted JSON
{
    "study_type": "randomized_trial",
    "exposure": {
        "band": "RF",
        "source": "mobile phone",
        "frequency_mhz": null,
        "sar_wkg": null,
        "duration": "during commuting (train/public transport and car; stand-by mode with periodic location updates)"
    },
    "population": null,
    "sample_size": null,
    "outcomes": [
        "Personal RF-EMF exposure measurements (uplink) during commuting",
        "Uplink power density (mW/m^2) under different phone stand-by scenarios"
    ],
    "main_findings": "In a randomized cross-over commuting measurement study, uplink exposure in the reference (disabled phone) scenario was highest during train rides (1.19 mW/m^2) and lowest during rural car rides (0.001 mW/m^2). In public transport, the impact of the participant’s own phone in stand-by mode was not observable due to high background uplink from other people’s phones, whereas in a car an activated phone produced uplink exposure orders of magnitude higher than the reference scenario. The authors conclude that personal RF-EMF exposure measurements are affected by one’s own phone in stand-by mode because of regular location updates.",
    "effect_direction": "mixed",
    "limitations": [
        "Sample size not reported in abstract",
        "Frequencies/bands not quantified beyond dual-band vs quad-band",
        "Exposure metric limited to uplink/power density during commuting; generalizability to other settings not stated",
        "Background exposure from others may mask own-phone contribution in some environments"
    ],
    "evidence_strength": "moderate",
    "confidence": 0.7399999999999999911182158029987476766109466552734375,
    "peer_reviewed_likely": "yes",
    "keywords": [
        "RF-EMF",
        "personal exposure measurement",
        "mobile phone",
        "stand-by mode",
        "location update",
        "uplink",
        "commuting",
        "randomized cross-over",
        "power density"
    ],
    "suggested_hubs": []
}

AI can be wrong. Always verify against the paper.

AI-extracted fields are generated from the abstract/metadata and may be incomplete or incorrect. This content is for informational purposes only and is not medical advice.

Comments

Log in to comment.

No comments yet.