Share
𝕏 Facebook LinkedIn

Body position can be monitored in 3D using miniature accelerometers and earth-magnetic field sensors.

PAPER pubmed Electroencephalography and clinical neurophysiology 1998 Engineering / measurement Effect: unclear Evidence: Insufficient

Abstract

OBJECTIVES: The study and diagnosis of movement disorders can be improved by monitoring body position simultaneously with the EMG. METHODS: We developed a monitor of the 3-dimensional (3D) orientation of body parts that can be applied in long-term ambulatory recordings in the daily life of a patient. The 3D sensor combines miniature sensors for earth's gravity and magnetism. It measures 60 x 50 x 10 mm and draws less than 1 mA of current from +/-5 V battery power. The non-horizontal direction of earth magnetism, as well as torque (pronation) of the body part, is corrected mathematically. RESULTS: This results in a measurement of the 3D orientation of a body part in terms of vertical inclination and horizontal azimuth. CONCLUSIONS: Calibration measurements indicate that this method is fairly accurate and practically applicable.

AI evidence extraction

At a glance
Study type
Engineering / measurement
Effect direction
unclear
Population
—
Sample size
—
Exposure
earth-magnetic field sensors
Evidence strength
Insufficient
Confidence: 66% · Peer-reviewed: yes

Main findings

The authors developed a wearable 3D orientation monitor combining miniature gravity and earth-magnetic field sensors for long-term ambulatory recordings. Calibration measurements indicated the method was fairly accurate and practically applicable for measuring vertical inclination and horizontal azimuth.

Outcomes measured

  • 3D orientation/body position monitoring (vertical inclination, horizontal azimuth)
  • Calibration accuracy/practical applicability
View raw extracted JSON
{
    "study_type": "engineering",
    "exposure": {
        "band": null,
        "source": "earth-magnetic field sensors",
        "frequency_mhz": null,
        "sar_wkg": null,
        "duration": null
    },
    "population": null,
    "sample_size": null,
    "outcomes": [
        "3D orientation/body position monitoring (vertical inclination, horizontal azimuth)",
        "Calibration accuracy/practical applicability"
    ],
    "main_findings": "The authors developed a wearable 3D orientation monitor combining miniature gravity and earth-magnetic field sensors for long-term ambulatory recordings. Calibration measurements indicated the method was fairly accurate and practically applicable for measuring vertical inclination and horizontal azimuth.",
    "effect_direction": "unclear",
    "limitations": [],
    "evidence_strength": "insufficient",
    "confidence": 0.66000000000000003108624468950438313186168670654296875,
    "peer_reviewed_likely": "yes",
    "keywords": [
        "body position",
        "3D orientation",
        "accelerometers",
        "earth-magnetic field",
        "magnetism sensors",
        "ambulatory monitoring",
        "movement disorders",
        "EMG"
    ],
    "suggested_hubs": []
}

AI can be wrong. Always verify against the paper.

AI-extracted fields are generated from the abstract/metadata and may be incomplete or incorrect. This content is for informational purposes only and is not medical advice.

Comments

Log in to comment.

No comments yet.