Share
𝕏 Facebook LinkedIn

Optical response of a d-fiber antenna in a finite-element analysis intended for radio-over-fiber applications.

PAPER pubmed Applied optics 2000 Engineering / measurement Effect: unclear Evidence: Insufficient

Abstract

An all-fiber antenna with a piezoelectric polymer-coated circular-core D fiber has been characterized by finite-element analysis. The response of the D-fiber antenna was determined over a wide frequency range from 1 to 500 MHz. The modeling predicts an electric-field-induced phase shift of 2.43 x 10(-5) rad/(V/m)/m at 5 MHz. At frequencies higher than 8 MHz the optical response is dominated by radial resonances of the D-fiber-coating composite. From the simulation results a minimum detectable electric field of 41-muV/m has been achieved with a 1-km length of coated D fiber. In addition, a D-fiber antenna network intended for microcellular communications has been analyzed by shot-noise-limited detection.

AI evidence extraction

At a glance
Study type
Engineering / measurement
Effect direction
unclear
Population
—
Sample size
—
Exposure
fiber antenna / radio-over-fiber (microcellular communications)
Evidence strength
Insufficient
Confidence: 74% · Peer-reviewed: yes

Main findings

Finite-element modeling of a piezoelectric polymer-coated circular-core D-fiber antenna predicted an electric-field-induced phase shift of 2.43 × 10^-5 rad/(V/m)/m at 5 MHz. The response was modeled from 1 to 500 MHz, with optical response dominated by radial resonances above 8 MHz. Simulations indicated a minimum detectable electric field of 41 µV/m using a 1-km length of coated D fiber, and a D-fiber antenna network for microcellular communications was analyzed under shot-noise-limited detection.

Outcomes measured

  • Optical phase shift response to electric field (rad/(V/m)/m)
  • Frequency-dependent optical response/resonances (1–500 MHz)
  • Minimum detectable electric field (µV/m)
  • Shot-noise-limited detection performance for D-fiber antenna network

Limitations

  • Finite-element simulation/modeling study; no experimental validation described in abstract
  • Key parameters (e.g., field strengths used in simulations, coating properties, boundary conditions) not detailed in abstract
View raw extracted JSON
{
    "study_type": "engineering",
    "exposure": {
        "band": null,
        "source": "fiber antenna / radio-over-fiber (microcellular communications)",
        "frequency_mhz": null,
        "sar_wkg": null,
        "duration": null
    },
    "population": null,
    "sample_size": null,
    "outcomes": [
        "Optical phase shift response to electric field (rad/(V/m)/m)",
        "Frequency-dependent optical response/resonances (1–500 MHz)",
        "Minimum detectable electric field (µV/m)",
        "Shot-noise-limited detection performance for D-fiber antenna network"
    ],
    "main_findings": "Finite-element modeling of a piezoelectric polymer-coated circular-core D-fiber antenna predicted an electric-field-induced phase shift of 2.43 × 10^-5 rad/(V/m)/m at 5 MHz. The response was modeled from 1 to 500 MHz, with optical response dominated by radial resonances above 8 MHz. Simulations indicated a minimum detectable electric field of 41 µV/m using a 1-km length of coated D fiber, and a D-fiber antenna network for microcellular communications was analyzed under shot-noise-limited detection.",
    "effect_direction": "unclear",
    "limitations": [
        "Finite-element simulation/modeling study; no experimental validation described in abstract",
        "Key parameters (e.g., field strengths used in simulations, coating properties, boundary conditions) not detailed in abstract"
    ],
    "evidence_strength": "insufficient",
    "confidence": 0.7399999999999999911182158029987476766109466552734375,
    "peer_reviewed_likely": "yes",
    "keywords": [
        "finite-element analysis",
        "all-fiber antenna",
        "D fiber",
        "piezoelectric polymer coating",
        "radio-over-fiber",
        "microcellular communications",
        "electric field detection",
        "phase shift",
        "radial resonances",
        "shot-noise-limited detection",
        "1–500 MHz"
    ],
    "suggested_hubs": []
}

AI can be wrong. Always verify against the paper.

AI-extracted fields are generated from the abstract/metadata and may be incomplete or incorrect. This content is for informational purposes only and is not medical advice.

Comments

Log in to comment.

No comments yet.