Experimental evidence of a UV light-induced long-range electric field in nanostructured TiO2 thin films in contact with aqueous electrolytes.
Abstract
Nanostructured TiO(2) thin-film electrodes of controlled thickness were obtained by immobilization of TiO(2) powder (Degussa P25) on SnO(2):F (FTO)-coated glasses by electrophoresis. The photocurrent-potential characteristics of the electrodes in contact with an indifferent aqueous electrolyte, for both front--and backside UV illumination, show the existence of a macroscopic electric field in the electrode region near the FTO substrate. This electric field, which is only photoinduced in the presence of water (it does not appear in TiO(2) dye-sensitized solar cells under visible illumination), apparently disappears when an efficient hole scavenger, like methanol, is added to the aqueous electrolyte. It is attributed to a nonhomogeneous spatial accumulation of photogenerated holes at surface-bound OH radicals resulting from the photooxidation of chemisorbed water molecules. The influence of film thickness and UV illumination mode (front- and backside) on the photoinduced electric field is analyzed by solving the transport equations for diffusion and drift of electrons.
AI evidence extraction
Main findings
Photocurrent-potential measurements under UV illumination (front and backside) indicate a macroscopic electric field near the FTO substrate in nanostructured TiO2 thin-film electrodes in contact with an aqueous electrolyte. The field is reported to be photoinduced only in the presence of water and to disappear when methanol is added; it is attributed to nonhomogeneous accumulation of photogenerated holes at surface-bound OH radicals from photooxidation of chemisorbed water.
Outcomes measured
- Photoinduced macroscopic electric field in TiO2 thin-film electrodes in aqueous electrolyte
- Photocurrent-potential characteristics under front- and backside UV illumination
- Effect of methanol (hole scavenger) on photoinduced electric field
- Influence of film thickness and illumination mode on photoinduced electric field (modeled via electron diffusion/drift transport equations)
View raw extracted JSON
{
"study_type": "other",
"exposure": {
"band": null,
"source": "UV illumination",
"frequency_mhz": null,
"sar_wkg": null,
"duration": null
},
"population": null,
"sample_size": null,
"outcomes": [
"Photoinduced macroscopic electric field in TiO2 thin-film electrodes in aqueous electrolyte",
"Photocurrent-potential characteristics under front- and backside UV illumination",
"Effect of methanol (hole scavenger) on photoinduced electric field",
"Influence of film thickness and illumination mode on photoinduced electric field (modeled via electron diffusion/drift transport equations)"
],
"main_findings": "Photocurrent-potential measurements under UV illumination (front and backside) indicate a macroscopic electric field near the FTO substrate in nanostructured TiO2 thin-film electrodes in contact with an aqueous electrolyte. The field is reported to be photoinduced only in the presence of water and to disappear when methanol is added; it is attributed to nonhomogeneous accumulation of photogenerated holes at surface-bound OH radicals from photooxidation of chemisorbed water.",
"effect_direction": "unclear",
"limitations": [],
"evidence_strength": "insufficient",
"confidence": 0.7399999999999999911182158029987476766109466552734375,
"peer_reviewed_likely": "yes",
"keywords": [
"TiO2 thin films",
"nanostructured electrodes",
"UV illumination",
"photoinduced electric field",
"aqueous electrolyte",
"FTO substrate",
"photocurrent-potential",
"hole scavenger",
"methanol",
"OH radicals",
"photooxidation",
"electron diffusion",
"electron drift",
"transport equations"
],
"suggested_hubs": []
}
AI can be wrong. Always verify against the paper.
Comments
Log in to comment.
No comments yet.