Share
𝕏 Facebook LinkedIn

Micromachined mmWave 28.0/38.0 GHz MIMO antenna loaded with frequency selective surface for gain enhancement and SAR analysis for future wireless applications.

PAPER pubmed PloS one 2026 Engineering / measurement Effect: unclear Evidence: Insufficient

Abstract

The presented work describes the four-port multiple-input multiple-output (MIMO) antenna designed on Rogers substrate with a thickness of 0.787 mm. The core of the MIMO antenna includes a hexagonal-patch etched by a rectangular slot and an etched hexagonal-ring in full-ground, which are printed on opposite surfaces, generating measured millimeter-wave (mmWave) bandwidth of 26.45 GHz-29.27 GHz and 37.04 GHz-39.12 GHz. The dielectric material is micromachined, and the four-port radiating elements maintain isolation of more than 20.0 dB with an overall size of 17.0 mm × 22.0 mm × 0.787 mm. The novel 11 × 11 hexagonal-ring frequency-selective-surface (FSS) is placed below the MIMO antenna, enhancing the peak-gain by 5.16 dBi with a size of 42.50 mm × 42.50 mm printed on Rogers5880 0.787 mm thickness. The MIMO antenna also features good diversity-performance with ECCmmWave-FSS < 0.18, DGmmWave-FSS > 9.995 dB, TARCmmWave-FSS < -4.76 dB, and CCLmmWave-FSS < 0.30 b/s/Hz. The cumulative features with dual millimeter wave bands, enhanced peak-realized gain, suppressed back-lobe radiations, and good diversity performance make the proposed MIMO antenna loaded with FSS suitable for 5G, satellite-communication, IoT, and smart cities applications. The MIMO antenna loaded with FSS is also subjected for SAR analysis for input power of 50 mW and 500 mW.

AI evidence extraction

At a glance
Study type
Engineering / measurement
Effect direction
unclear
Population
—
Sample size
—
Exposure
mmWave antenna (MIMO) for wireless applications
Evidence strength
Insufficient
Confidence: 74% · Peer-reviewed: yes

Main findings

A four-port micromachined mmWave MIMO antenna on Rogers substrate achieved measured bandwidths of 26.45–29.27 GHz and 37.04–39.12 GHz with >20 dB isolation. An 11×11 hexagonal-ring FSS placed below the antenna increased peak gain by 5.16 dBi, and the design was subjected to SAR analysis at 50 mW and 500 mW input power.

Outcomes measured

  • Antenna bandwidth (26.45–29.27 GHz; 37.04–39.12 GHz)
  • Isolation (>20 dB)
  • Peak realized gain enhancement (with FSS)
  • Diversity metrics (ECC, DG, TARC, CCL)
  • Back-lobe radiation suppression
  • SAR analysis at input powers 50 mW and 500 mW

Limitations

  • No SAR values or compliance comparison reported in the abstract
  • No biological/health outcomes or exposed population described

Suggested hubs

  • 5g-policy (0.2)
    Mentions suitability for 5G applications and mmWave bands (28/38 GHz), but the paper is primarily antenna engineering rather than policy.
View raw extracted JSON
{
    "study_type": "engineering",
    "exposure": {
        "band": "mmWave",
        "source": "antenna (MIMO) for wireless applications",
        "frequency_mhz": null,
        "sar_wkg": null,
        "duration": null
    },
    "population": null,
    "sample_size": null,
    "outcomes": [
        "Antenna bandwidth (26.45–29.27 GHz; 37.04–39.12 GHz)",
        "Isolation (>20 dB)",
        "Peak realized gain enhancement (with FSS)",
        "Diversity metrics (ECC, DG, TARC, CCL)",
        "Back-lobe radiation suppression",
        "SAR analysis at input powers 50 mW and 500 mW"
    ],
    "main_findings": "A four-port micromachined mmWave MIMO antenna on Rogers substrate achieved measured bandwidths of 26.45–29.27 GHz and 37.04–39.12 GHz with >20 dB isolation. An 11×11 hexagonal-ring FSS placed below the antenna increased peak gain by 5.16 dBi, and the design was subjected to SAR analysis at 50 mW and 500 mW input power.",
    "effect_direction": "unclear",
    "limitations": [
        "No SAR values or compliance comparison reported in the abstract",
        "No biological/health outcomes or exposed population described"
    ],
    "evidence_strength": "insufficient",
    "confidence": 0.7399999999999999911182158029987476766109466552734375,
    "peer_reviewed_likely": "yes",
    "keywords": [
        "mmWave",
        "28 GHz",
        "38 GHz",
        "MIMO antenna",
        "frequency selective surface (FSS)",
        "gain enhancement",
        "SAR analysis",
        "5G",
        "satellite communication",
        "IoT",
        "smart cities"
    ],
    "suggested_hubs": [
        {
            "slug": "5g-policy",
            "weight": 0.200000000000000011102230246251565404236316680908203125,
            "reason": "Mentions suitability for 5G applications and mmWave bands (28/38 GHz), but the paper is primarily antenna engineering rather than policy."
        }
    ]
}

AI can be wrong. Always verify against the paper.

AI-extracted fields are generated from the abstract/metadata and may be incomplete or incorrect. This content is for informational purposes only and is not medical advice.

Comments

Log in to comment.

No comments yet.