Archive
4 postsAmbient RF-EMF exposure in surgical operating rooms from telecommunication antennas and Wi-Fi sources
This PubMed-listed study measured ambient radiofrequency electromagnetic field (RF-EMF) levels during surgical operations in 15 hospital operating rooms in Albacete, Spain, focusing on contributions from telecommunication antennas and Wi‑Fi. Using an exposimeter logging every 5 seconds across 67 procedures (~120 hours), the authors report that observed ambient RF‑EMF levels were comparable to other European indoor microenvironment studies. They report exposures in all operating rooms remained below 0.4% of the ICNIRP (2020) reference level, with the highest recorded mean value on the 2.4 GHz Wi‑Fi band.
Evaluation of Exposure Assessment Methods and Procedures for Induction Hobs (Stoves)
This exposure-assessment study evaluated magnetic-field and contact-current exposures from modern induction hobs using IEC-based measurement procedures, 3D field scanning, and numerical dosimetry in anatomical models. It reports large between-hob variability in exposure and states that IEC 62233 may substantially underestimate user exposure. The authors argue that design modifications can reduce exposure and that product standards should be revised to better reflect realistic user scenarios.
Traceable Assessment of the Absorbed Power Density of Body Mounted Devices at Frequencies Above 10 GHz
This paper presents a traceable experimental dosimetry method to measure absorbed power density (APD) from body-mounted wireless devices at frequencies above 10 GHz. It combines a miniaturized broadband probe, a composite skin-equivalent phantom, and reconstruction/calibration procedures, with validation using reference antennas. The approach is reported as validated for 24–30 GHz and extendable to 10–45 GHz, supporting regulatory-type testing aligned with international safety standards.
Comparative Analysis of Beamforming Techniques and Beam Management in 5G Communication Systems
This engineering paper reviews and classifies beamforming techniques in 5G New Radio and examines beam management procedures at Layer 1 and Layer 2. It analyzes the spectral spectrogram of Synchronization Signal Blocks (SSBs) to illustrate how configuration parameters influence spectral occupancy and synchronization-related performance in different deployment scenarios, including FR2. The work is framed as technical optimization, with only a general note that such knowledge may inform safety considerations related to EMF exposure.