Archive

This PubMed-listed review examines how 5G deployment (denser small cells and beamforming) changes RF-EMF exposure patterns and evaluates the validity of low-cost sensors for 5G exposure monitoring. Reviewing over 60 studies across Sub-6 GHz and emerging mmWave systems, it reports that well-calibrated low-cost sensors…

This paper presents a traceable experimental dosimetry method to measure absorbed power density (APD) from body-mounted wireless devices at frequencies above 10 GHz. It combines a miniaturized broadband probe, a composite skin-equivalent phantom, and reconstruction/calibration procedures, with validation using…

This engineering study evaluates and calibrates an EMF area monitor for the 300 kHz–20 MHz frequency band using a multi-wire transverse electromagnetic (MWTEM) transmission line as a controlled electric-field source. The authors highlight that low-frequency electric-field measurements can be sensitive to boundary…

This paper describes the design, calibration, and experimental validation of a low-cost tri-axial sensor for monitoring 50 Hz magnetic fields from high-voltage power lines. The sensor was calibrated on-board and in-lab against a narrowband EHP-50 benchmark and then verified in situ at two locations, with reported…

This engineering paper demonstrates an auto-tuning method for a high-sensitivity RF interferometer using a tunable liquid attenuator controlled by liquid volume. The authors report an effective quality factor up to 1×10 at ~5 GHz and a self-calibration/measurement process from 2 to 7.5 GHz using a methanol-water…

This engineering study describes using antenna-coupled microwave radiation to enhance laser-induced breakdown spectroscopy (LIBS) emission from a Gd2O3 sample at reduced pressure. The authors report substantially increased plasma emission intensity, higher-temperature plasma, and longer emission lifetime when…