HHS-OASH-2026-0397-5825
https://www.regulations.gov/comment/HHS-OASH-2026-0397-5825

Hello! I am a Swede living in Sweden and in Spain. I have electrosensitivity since 2006 due to working too much with technology as a filmmaker. It was eventually my own canon videocamera that made me fall into the pit. Needless to say that I get headache and energy loss and constant colds when my immune system goes down in environments with high microwave frequencies and where the electromagnetic fields are high in both microtesla and voltage. I wanted to point out an issue that is not really covered since the focus is mostly on 5G and other terrible wireless systems. I have noticed that these days the microtesla is really high inside and outside houses when measuring with my electrosmog meter, and this I also feel a lot in my whole body and head. Furthermore I have unfortunately not found a good place to live in Malmö in Sweden due to the central heating of the city and due to the smart meters from which its inherent transformers and microwaves emit spikes on the kind 50hz electrical cords in all the houses. And the central heating has also high voltage and microtesla that are transmitted from the original central heating and enlarged by the switchers in every house and then spread up by the leading metal tubes in the house to all the radiators in every apartment or villa. So these will literally be radiating in every room high fluctuating  microtesla and voltage which is eat to measure with a electrosmog meter (Cornet for example). So this is the case in bigger cities in Sweden. So I was also surprised to notice high voltage and really high fluctuating microtesla in houses Portugal for example. I don't know why it's so. And I also noticed it with my meter and my brain that got a heavy headache at a friend's apartment in Malmö. So I measured outside her apartment house where there had been put up lightment of modern color lamps. My assumption is that these lampa are  wireless controlled  and therefore emit such high microtesla and voltage in the whole environment, both outside and inside the houses. I am really worried about this and would like to see some safety regulations around this. 
So an other issue are the solar cells and the wind mills. I have learned that it has to do with that there are transformers up at the highest point of the windmills that are spreading electromagnetism for serval kilometers away. I "feel" (headache , nausea, energy loss) from a windmill if I am closer than five kilometers away. Instead there should be a faraday's cage around that transformer, or put it on the ground with a parade cage around it. The transformer is changing the voltage rate. This should be constructed in a safer way. 
And likewise I cannot be close to solar cells or its equipment (transformers and controllers) forany meters. It is not a joke since solar cells are forbidden where military planes are flying low, since the radiation from the solar cells technology is disturbing the instruments inside the planes. Nevertheless there are "kind" solar cells and equipment and it is important to not install the equalizer system on the solar cells, ie that regulates the solar cells when there are clouds that give shade on some parts of the solar cells that are connected together. This makes the whole solar cell roof radiant... 
Apart from wireless systems and gadgets I also suffer a lot from house alarms and energy saving lamps and some kind of led  lamps. Lamps can emit so much fluctuating microtesla. And also dimmers, which is due to the hammering on the electrical cord that therefore emit high spikes and give headache and energy loss, among all the other symptoms... So to avoid that it's better to have the dimmer lamp fully turned on or turned off. Not in between. 
I also noticed that my sick and sad old aunt was sleeping in fluctuating microtesla in her hospital bed at the senior sick house where her daughter put her. I went there to clean the electromagnetic and wireless ambiance of her room that made her so dizzy and lost. Even if I unplugged the electrical cable of her aluminium metal bed structure which had fluctuating microtesla according to my electrosmog meter it still was emitting, probably due to a encapsulated battery in the bed structure to moving the different bed parts up and down. So I found her a second hand bed of wood, with the same possibility to move the parts up and down with a cord control that the personnel would plug in if needed. She slept so much better after that. And also because I shut down one of the main fuses in the fuse box in her room as well since I measured it with my electrosmog meter that was peaking totally. So strange...